Woodfibre LNG Project is a liquefied natural gas (LNG) processing and export facility proposed to be developed by Woodfibre Natural Gas, a Pacific Oil & Gas Company. The facility will be located around 7km southwest of Squamish, British Columbia, near the north-western shoreline of Howe Sound.
Construction of the plant will start in 2015 and first gas is expected by early 2017. The facility will operate for 25 years and will have an annual processing and exporting capacity of 1.5million tonnes to 2.1million tonnes of LNG. The project is expected to create approximately 600 jobs during construction and 100 permanent jobs when operational.
The National Energy Board (NEB) approved the LNG export license for the project in December 2013 for the application submitted in July 2013.
The Canadian Environmental Assessment and the British Columbia Environmental Assessment will be performed for the Woodfibre project by the Canadian Environmental Assessment Agency (CEAA) and the British Columbia Environmental Assessment (BCEA) respectively.
Woodfibre LNG project site details
Woodfibre Natural Gas signed a purchase sales agreement (PSA) with Western Forest Products (WFP) to acquire the site for the LNG processing and export facility in 2013. As per the agreement, WFP will clean the site and perform remediation activities in order to acquire Certificate of Compliance (CoC) from the British Columbian Ministry of Environment.
"The site currently features an existing FortisBC gas pipeline, an electricity transmission line connected to the BC Hydro transmission grid and an existing deep-water port."
The site currently features an existing FortisBC gas pipeline, an electricity transmission line connected to the BC Hydro transmission grid and an existing deep-water port.
Pacific Energy Corporation (PEC) is discussing with the Spectra Energy Transmission (Spectra) to use Spectra's existing pipeline systems for the transportation of the natural gas. Spectra is a joint venture of FortisBC Energy (FEVI) and Westcoast Energy (Westcoast).
Development details of the Woodfibre LNG project
The project will be developed in a single phase. Two possible configurations are being considered for residing the gas pre-treatment and LNG processing facilities of the project.
The preferred configuration is a permanently moored Floating Liquefied Natural Gas (FLNG) barge equipped with gas pre-treatment and LNG processing modules will be constructed near shore. The other configuration envisages the construction of all gas pre-treatment and LNG processing modules on land.
Infrastructure for the British Columbia Woodfibre project
The project will include development of a natural gas liquefaction facility and an LNG export facility. It will involve the construction and installation of a natural gas reception system, natural gas liquefaction train modules, gas pre-treatment modules, gas liquefaction train modules, power supply systems and marine terminals.
"The natural gas produced from the LNG facility will be exported via the FortisBC pipeline."
The project is expected to annually use 40 LNG carriers, which will be equipped with advanced radar systems, leak detection and emergency shutdown technology. Other support infrastructure will include single marine mooring facilities, materials offloading facility and other temporary facilities such as electrical substations, site administration, and chemical-fuelling-storage facilities.
A helipad will also be constructed. Other utility facilities will be drinking water systems, sewer systems and waste water systems.
Processing and export
The natural gas produced from the LNG facility will be exported via the FortisBC pipeline. The gas will be liquefied and loaded into LNG carriers for further transportation.
The LNG will be stored in floating storage units (FSU). The feed gas will be supplied by the Eagle Mountain-Woodfibre gas pipeline.